Smart Kitchen Gas Leak Detector

• Customization: Available
• Type: Alarm
• Theory: Sound Control
• Model NO.: GD-709
• Light Source: LED
• Lamp Type: All Light
• Emitting Color: Red
• Material: Plastic
• Appliances: Room
• Lamp Power: ≤5W
• Waterproof: Not Waterproof
• Certification: CE, RoHS
• Alarm Output: Sound & Flash Alarm
• Alarm Volume: 85sb
• Alarm Leve: 10%Lel
• Transport Package: Gift Box
• Specification: 220V
• Trademark: OEM
• Origin: China
• Production Capacity: 50, 000PCS/Month

Product Description

Smart Kitchen Gas Leak Detector

 

Product Introduction

The product is wall mounted with high stability (hereinafter called detector). It is used for detecting leaking gas.

Advanced semiconductor sensor is adopted to ensure high stability and long life.This product can drive away

small animals such as mosquitoes or mice without harming the human body by emitting high-frequency

electromagnetic waves.It is convenient for mounting. The product is suitable for the safety of residential house,

villas, hotels, markets etc.

Technical Specification

Operating Voltage: AC 200V~240V

Rating Power: 3W (AC 220V)

Static Current: ≤100mA

Alarm Current: ≤130mA

Warm-up Time: about 180S

Detect Gas: Gas-natural/LPG

Alarm Level: 10%LEL

Sound Level: 85dB/m

Alarm Indicator: Red LED flash & Strobe Light

Operating Temperature: -10ºC~+50ºC

Environment Humidity: ≤95RH (no condensation)

Alarm Output: Sound & flash alarm

Installation Mode: wall mounted

Drive away small animals

Operation Instruction

The Gas Detector usually can be used independently,

1. Firstly, choosing a suitable position to install the Detector according to the Installation.

2. Secondly, with power supply, the green LED flashes once a second for about 3 minutes continuously, that runs

the inside sensor (warm-up state). After doing that the green LED lights on, that means the detector comes into

normal working state.

3. While detecting the gas leaking, the red LED flashes, the Buzzer sends out the alarm sound "Di …Di" .

4.Press the button down,the Detector will turn on self-check mode.At this time, the detector simulates the alarm

state the red LED flashes once every 1s,the yellow and green lights are steady on.

5.When the Detector alarms, press the button to silence the buzzer for 10 minutes, the red light alarm is still

normal, and the buzzer stops sounding. Exit the alarm and re-enter the alarm during the silence, and the silence

is still effective.

6. The buzzer long beeps and the yellow LED on means the inside sensor failure. Please cut off the power and

contact the After Service Center.

7. If the detector runs disorderly, cut the power off and retry again. If still in wrong, please contact the after service

center.